ignition spark
英 [ɪɡˈnɪʃn spɑːk]
美 [ɪɡˈnɪʃn spɑːrk]
点火火花
双语例句
- Caution! Before carrying out any maintenance or handling the machine, turn the engine off, wait until the blade stops rotating and disconnect the ignition cable from the spark plug.
注意：维护机器前，请关闭发动机并等待，直至刀片停止旋转使发火电缆从火花塞分离，所有发热部件冷却为止。 - The ignition pack consists of individual coils that are mounted directly onto the spark plugs and are housed in a'cartridge ', located between the engine's camshafts.
点火包包含个人线圈，线圈被直接安装到火花塞和被放于墨盒里，位于发动机的凸轮轴之间。 - Three factors affect ignition, fuel vaporization, sparkplug location and spark energy.
影响点火的因素有三个，即燃油的蒸发、火花塞的位置和火花能量。 - In recent years, We newly develop the alloy technic, which makes the ignition of spark plug more quick and precise, and have a big help for the great power of the engine.
尖端合金技术更是立本公司近年来的研制成果，其点火迅猛精准，能引发出机动车的澎湃动力。 - Design and Approach of Double Ignition Clearance Plasma Jet Spark Plug
双点火间隙等离子流火花塞的设计与探讨 - Ignition resistance Fuel is ignited by the spark plug.
燃料由火花塞点火。 - The ignition system delivers a high-voltage surge of electricity to the spark plug to produce the spark.
电火花是由点火系统向火花塞提供高压电脉冲而产生的。 - Ignition Characteristics and Hazardous Classification Method for Electrostatic Discharge Spark s
静电放电火花点燃特性与危险性分级方法 - Modeling of Ignition Process in Spark-Ignition Engine s
电阻型火花塞火花点火式发动机点火过程数值模拟 - The advanced distributorless ignition system is adopted on the engine of BUICK with each ignition winding supplying high voltage to the two-cylinder spark plug at one time.
别克轿车发动机采用先进的无分电器式电子点火系，每只点火线圈同时给两缸火花塞提供高压电。 - The ionic signal of ignition and combustion could be obtained by direct power between the spark plug poles, and the main features of both normal combustion and misfire could be acquired by analyzing the signal.
通过在火花塞电极两端加直流电压的方法获得点火和燃气燃烧中所产生的离子信号.通过信号分析，即可得到发动机正常燃烧和失火的基本特征。 - Introduce an automatic welding machine for platinum iridium spark plugs, This machine is used to weld the fine platinum iridium wire on the ignition end of spark plugs. The machine is fully automatic and has reliable welding quality.
介绍了一种铂、铱金火花塞自动焊接设备，该设备用于将细小的铂、铱金丝焊接在火花塞的点火端上，全自动、焊接质量稳定可靠。 - The breakless transistor ignition device has been paid attention due to its even ignition energy and greater spark intensity.
晶体管无触点点火装置，因其点火能量均匀，火花强度大而逐渐受到重视。 - The initiating detonation systems of voltage multiplying rectification, half-wave rectification and direct-current supply are designed to implement the control ignition system of PDE over ignition energy and spark frequency.
设计的倍压整流、半波整流和直流供电的脉冲爆震发动机起爆点火系统实现了点火能量和火花放电频率的控制。 - The effective approaches for improving ignition performance are to improve quality of fuel sprays, to sustain optimum spark time, to keep the electric pole distance a little more than quenching distance and to pre-heat starting fuel etc.
提高雾化质量，保持最佳火花持续时间，电极间距稍大于冷熄距离。以及对起动燃油加温等，都是改善点火性能的有效途径。 - By rational designing the combustion chamber, choosing the compression ratio, adopting the electronic controlled ignition system with spark advance angle along with speed's change and optimizing the LPG-air blender, the single cylinder gas fuel engine acquires the fine integrated performance.
该机通过合理的设计燃烧室，选择适当的压缩比，采用点火提前角随转速变化的电子控制的点火系统，通过对燃气和空气混合器的优化，使单缸燃气发动机取得了优良的综合性能。 - This paper shows that the traditional ignition systems are not satisfactory for the needs of modern engines on the spark parameters ( such as spark energy, spark duration, the raising time of secondary voltage etc.)
本文概述了传统点火系在火花参数及点火正时方面目益不能满足现代发动机要求的情况。 - The ignition of combustible gas stream by electric spark
电火花对于可燃气流的引燃 - The ignition of combustible gas stream by electric spark discharge was considered both theoretically and experimentally.
对电火花引燃可燃气流的问题进行了理论分析和实验研究。 - Through tests, we investigate the quality of HCCI combustion with multi-pulse spark ignition, and the influence of ignition parameter to HCCI combustion process with spark ignition.
通过实验研究了多脉冲火花助燃HCCI的燃烧性质，和点火参数对火花助燃HCCI燃烧的影响。 - The ringed side-electrode spark plug is superior in ignition compared with the traditional single side-electrode spark plugs, but the shortcoming of easily carbon fouling on its head limits its service life in the internal combustion engines.
环状侧电极火花塞较之传统单侧电极具有良好的点火性能，但是其头部易积炭的缺点限制了在内燃机中的使用寿命。 - It have been conducted that the ignition capability for different types of ESD spark are as follows: being very weak for corona discharge, being very strong for propagating brush discharge, and the effective ignition energy for cone discharge being confirmed as 10 mJ.
电晕放电的点燃能力很弱而传播型刷形放电的点燃能力很强；料仓堆表面放电的有效点火能量可考虑为10mJ； - Spark Ignition Engine Combustion Research Using Spark Plug Optical Fiber Sensor
用火花塞光纤传感器对火花点火式发动机燃烧进行研究 - The research results show that the ignition efficiency of PCD is 12 times more than the spark plug. PCD produces many discharge channels simultaneously which distribute in a large space volume so as to make multiple sites, high efficiency and extensive ignition possible.
研究表明，脉冲电晕等离子体点火比传统火花塞点火的效率高12倍，且可在燃烧室内瞬间产生多个大尺度放电通道，实现可燃混合气的多源高效点火； - If any link is broken, it will stop the energy transmission. Through the experiments, it is shown that impact height, impact angle, the weight of impact material and environment condition will affect ignition status caused by friction spark.
通过实验研究证明冲击高度、冲击角度、冲击物的重量和环境条件对摩擦火花引火情况都有影响。 - The ignition delay time of plasma ignition is less than that of conventional spark ignition, while the percentage of the reduced ignition delay time declines as the working frequency increases.
等离子体的点火延迟时间小于常规火花点火的点火延迟时间，随着工作频率的提高，点火延迟时间减少的程度下降。 - In modern spark ignition engine, in order to optimize Spark Advance Angle to increase the dynamic performance and economic performance and decrease emission, the Microcomputer controlled ignition system is adopted.
为了提高火花点火发动机动力性、经济性和改善排放，进行点火提前角的调整优化，通常采用电控点火系统。 - In this scheme, different from the conventional approach to central hot-spot ignition, a pre-compressed DT target will be ignited by an external spark. Fast ignition relax the conditions on target compression and reduce the total energy requirements for ICF ignition, leading to higher target gain.
不同于传统的中心热斑点火，快点火中预压缩的氘氚靶将被一个外源点燃，这种点火途径不仅降低了靶压缩条件和驱动能量的要求，也能获得更高的能量增益。 - When worked in non-knock conditions, the most optimum spark angle is the adder of the initial spark angle, the basic ignition angle and the amendment spark angle.
发动机在非爆震区域工况下，其最佳点火提前角为初始点火提前角、基本点火提前角和修正点火提前角之和。